Low carbon steel is generally rolled into angle steel, channel steel, I-beam, steel pipe, steel strip or steel plate, which is used to make various building components, containers, boxes, furnace bodies and agricultural machinery. High quality low carbon steel is rolled into thin plates to make deep drawing products such as automobile cab and engine hood, and bars are also rolled into bars for mechanical parts with low strength requirements. Generally, low carbon steel is not heat treated before use, and carburizing or cyaniding treatment is carried out for parts with high surface temperature and good wear resistance. The use of low carbon steel is limited due to its low strength. The strength of carbon steel can be greatly improved by properly increasing the manganese content in carbon steel and adding a small amount of vanadium, titanium, niobium and other alloy elements. If the carbon content in the steel is reduced and a small amount of aluminum, boron and carbide forming elements are added, the ultra-low carbon bainite can be obtained with high strength and good plasticity and toughness.
Read more
Low carbon steel is generally rolled into angle steel, channel steel, I-beam, steel pipe, steel strip or steel plate, which is used to make various building components, containers, boxes, furnace bodies and agricultural machinery. High quality low carbon steel is rolled into thin plates to make deep drawing products such as automobile cab and engine hood, and bars are also rolled into bars for mechanical parts with low strength requirements. Generally, low carbon steel is not heat treated before use, and carburizing or cyaniding treatment is carried out for parts with high surface temperature and good wear resistance. The use of low carbon steel is limited due to its low strength. The strength of carbon steel can be greatly improved by properly increasing the manganese content in carbon steel and adding a small amount of vanadium, titanium, niobium and other alloy elements. If the carbon content in the steel is reduced and a small amount of aluminum, boron and carbide forming elements are added, the ultra-low carbon bainite can be obtained with high strength and good plasticity and toughness.
Read more
Wear resistant steel plate refers to special plate products which are used in large area wear condition.Wear resistant steel plate has high abrasion resistance and good impact performance. It can be cut, bent, welded, etc. It can be connected with other structures by welding, plug welding and bolt connection,It has the characteristics of time-saving and convenient in the process of maintenance.Now widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, brick and other industries. Compared with other materials, it is highly cost-effective and has been favored by more and more industries and manufacturers.a
Read more
Wear resistant steel plate refers to special plate products which are used in large area wear condition.Wear resistant steel plate has high abrasion resistance and good impact performance. It can be cut, bent, welded, etc. It can be connected with other structures by welding, plug welding and bolt connection,It has the characteristics of time-saving and convenient in the process of maintenance.Now widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, brick and other industries. Compared with other materials, it is highly cost-effective and has been favored by more and more industries and manufacturers.a
Read more
Corten A plate is weather resistant steel which is better suited for heavy and load bearing structures.Corten A is produced from billet castings from blast furnace and hot rolled in a continuous mill for smaller thicknesses and on a four high mill for others. The purity of the steel of fine grade austenitic quality and the addition of special alloys, and provide this steel plates, excellent mechanical characteristics, even at high temperatures and self-passivating properties when exposed tocorrosive agents present in urban atmosphere. This property allows this steel to face down corrosion for longer periods when compared to common steel, even if not painted. Hot Forming: Normally it is carried out in a temperature range of 800 °C to 1050 °C. If it is required in different temperature, it is advisable to carry out a normalizing treatment at the end.
Read more
Corten A plate is weather resistant steel which is better suited for heavy and load bearing structures.Corten A is produced from billet castings from blast furnace and hot rolled in a continuous mill for smaller thicknesses and on a four high mill for others. The purity of the steel of fine grade austenitic quality and the addition of special alloys, and provide this steel plates, excellent mechanical characteristics, even at high temperatures and self-passivating properties when exposed tocorrosive agents present in urban atmosphere. This property allows this steel to face down corrosion for longer periods when compared to common steel, even if not painted. Hot Forming: Normally it is carried out in a temperature range of 800 °C to 1050 °C. If it is required in different temperature, it is advisable to carry out a normalizing treatment at the end. Flame Cutting: Normally it is carried out with the usual methods. In general, no preheat is required, but working on plates with a temperature of less than 10 °C shall be avoided. Drawing: In spite of its excellent mechanical Properties, Corten A can be moderately drawn. Welding: Corten A plate can be easily welded using common procedures used for mild steel plate (spot, TIG, MIG, MAG, electrode etc.). It is however advisable to avoid tempering in the heated zone and therefore to limit the ratio of linear energy to the thickness. Considering the chemical composition, it can be stated that Corten A steel is not subject to cold cracking. Welded structures fabricated with corten a steel does not normally need thermal stress relief treatment. Refercence Standards: Corten A steel plate to be following standards: NFA35-502-E36W, ASTMA242 and A588, EN10155-Fe510A1K1/DD2K1, S.E.W087. Grade: Cor-ten A, Cor-ten B Technique: Hot rolled Thickness: 2.0mm-100mm Width: 1250mm-4000mm Length: Customer's Requirement Packing: Bundle packed by steel strip, or as per request Application: Construction, Building, Container, shipping building, Bridge, Garden, Home, etc. Payment Terms: T/T or L/C at sight Deliver Conditions: Bulk vessel or container Vessel Deliver Time:In 3 to 25 days after receipt of L/C or T/T
Read more
patterned section A steel plate with a raised (or depressed) pattern on its surface. Checkered steel plate, also known as chequered steel plate, is the steel plate with rhombic or protruding edges on its surface. The pattern can be a single diamond, lentil or round bean shape, or two or more patterns can be properly combined to form a composite pattern plate. The pattern mainly plays the role of antiskid and decoration. The results show that the combined pattern plate is superior to the single pattern plate in terms of anti slip ability, bending resistance, metal saving and appearance. Pattern steel plate is widely used in shipbuilding, boiler, automobile, tractor, train carriage and construction industry. Due to the sharp edge on the surface and anti-skid effect, the pattern steel plate can be used as floor, workshop escalator, work frame pedal, ship deck, car bottom plate, etc. The pattern steel plate is used for the pedal of workshop, large equipment or ship's walkway and stairs. It is the steel plate with diamond or lentil pattern on the surface.
Read more
patterned section A steel plate with a raised (or depressed) pattern on its surface. Checkered steel plate, also known as chequered steel plate, is the steel plate with rhombic or protruding edges on its surface. The pattern can be a single diamond, lentil or round bean shape, or two or more patterns can be properly combined to form a composite pattern plate. The pattern mainly plays the role of antiskid and decoration. The results show that the combined pattern plate is superior to the single pattern plate in terms of anti slip ability, bending resistance, metal saving and appearance. Pattern steel plate is widely used in shipbuilding, boiler, automobile, tractor, train carriage and construction industry. Due to the sharp edge on the surface and anti-skid effect, the pattern steel plate can be used as floor, workshop escalator, work frame pedal, ship deck, car bottom plate, etc. The pattern steel plate is used for the pedal of workshop, large equipment or ship's walkway and stairs. It is the steel plate with diamond or lentil pattern on the surface. The steel plate is made of ordinary carbon steel 1-3 class B steel, with thickness of 2.5-8 mm, width of 600-1800 mm and length of 2000-12000 mm. The specification of pattern steel plate is expressed by basic thickness (excluding the thickness of rib), and there are 10 specifications of 2.5-8 mm. No. 1-3 is used for checkered plate. The height of the checkered plate shall not be less than 0.2 times of the thickness of the substrate; The pattern steel plate shall be delivered according to the actual weight or theoretical weight; Mark example: made of Q235-A, with the size of 4 * 1000 * 4000mm Round bean pattern steel plate, its mark is: round bean pattern steel plate q235-a-4 * 1000 * 4000-gb / T 3277-91 Diamond pattern steel plate, marked as: rhombic pattern steel plate B 3-4 * 1000 * 4000-gb 3277-82 The steel plate shall be delivered in hot rolling condition; the surface of patterned steel plate shall be free of bubbles, scabs, tensile cracks, folds and inclusions, and the steel plate shall not be stratified. The surface quality is divided into two levels: General accuracy: the steel plate surface is allowed to have a thin layer of oxide scale, rust, surface roughness and other local defects with height or depth exceeding the allowable deviation. No obvious burr and individual marks with height not exceeding the grain height are allowed on the pattern. The maximum area of a single defect does not exceed the square of the length of the grain. High precision: thin oxide scale, rust and other local defects with height or depth not exceeding half of thickness tolerance are allowed on steel plate surface. The pattern shall be complete and undamaged, and local slight burr with height not exceeding half of thickness tolerance is allowed.
Read more
Features Light weight Low cost Easier and convenient to install Environmental friendly and energy saving Anti-dirt and self-cleaning Corrosion resistant and moisture proof Weathering resistance stronger than stone material and valid time longer Excellent ductility, can be made into various shapes Aluminum sheet is mostly used for some parts which require good forming and processing properties, high anti-corrosion, but low strength, such as video, the transportation and storage equipments of chemical products, metal sheet products, the processing of drawing spinning hollow goods, welding key combination, reflector and nameplat, etc.
Read more
Wanzhi steel is a subsidiary of Wanzhi group in import and export business, which is responsible for the import and export business of metal materials.
Perfect purchasing process, strict quality control system, professional legal department,
quick after-sale service response, high standard requirements for each link.
Copyright 2020 Wanzhi Steel . All Rights Reserved. privacy
